In this lesson, students will explore apples using their five senses. Includes activity instructions, extension activities, songs, and apple and five senses realted reading list.

NGSS: K-ESS3-1, 1-LS1-1

Time: 30 minutes

Materials: "Apples Grow on Trees" or other book about apples.

In this activity, kids will work on two fundamental early math skills – sorting/classifying, and graphing. There will also be some great fine motor skill practice! Includes place-based discussion questions, activity instructions, extension activities, songs, and student graph worksheets.

NGSS: K-LS1-1, 1-LS1-1, partially meets K-ESS3-1 (book and discussion)

Common Core: MP.4

Time: 45 minutes

Matierals: bag of dried beans ("16 bean soup"), paper bowls, glue, chart paper, the book "One Bean" or similar book about growing food plants, especially beans.

In this lesson students will learn about the different types of bees, the bee life cycle, and the importance of bees for our local ecosystems. Includes some background information about bees and instructions for the pollination simulation activity.

Time: 45-50 minutes

Materials: "The Honeybee Man" or other book about bees and pollination, small bag of cheetos, pip cleaners, various colors of construction paper, pompoms (small and medium), small dixie cups for water, straws (15 per group), jewerly bags, and yarn

Students will be introduced to addition, multiplication, and division of the benchmark fractions 1/2, 1/3, and 1/4 with a fun, hands-on experience. Students will layer the dry ingredients for a brownie recipe into a canning jar while having a rich discussion that aides visualizing operations with fractions. This shared experience can be referred to during future instruction.

Students will be introduced to addition, multiplication, and division of the benchmark fractions 1/2, 1/3, and 1/4 with a fun, hands-on experience. Students will layer the dry ingredients for a brownie recipe into a canning jar while having a rich discussion that aides visualizing operations with fractions. This shared experience can be referred to during future instruction.

This unit consists of five lessons covering buoyancy and engineering boats. Each lesson includes goals, anticipatory set, learner objectives, guided practice, procedure instructions, closing activities, and extensions. Student handouts and worksheets are also included.

Lesson 1: Intro to Buoyancy
Lesson 2: Engineer a Barge
Lesson 3: Intro to Sails & Motion
Lesson 4: Engineer a Sailboat
Lesson 5: Final Vessel

NGSS: 3-5-ETS1-1, 3-5-ETS1-2, 3-5-ETS1-3

Lesson 1 materials: empty 2-liter bottles with tops cut off, pennies or other coins, marble, modeling clay, crap wood, rocks, pingpong ball, golf ball, popsicle stick, paper clip, scale, other object for floating or sinking
Lesson 2 materials: for each student - 12" x 12" piece of aluminum foil, 4 popsicle sticks, 2 straws, 12" masking tape; teacher pre-setup - enough pennies for testing (500 pennies per group), pool filled 2/3 with water
Lesson 3 materials: string/yarn, 1/2 straw for each student, 2 different types of paper (tissue & white copy paper), tape, scissors, fan, wooden skewers, 2 popsicle sticks per student, rulers, protractors, stencils.
Lesson 4 materials: 8 popsicle sticks, 1 wooden skewer, 1 straw, masking tape or duct tape, tissue paper or copy paper
Lesson 5 materials: same as Lesson 2

This unit is an EQuIP Exemplar for adult education (http://achieve.org/equip). Students will connect their prior, real-world knowledge to the concept of order in mathematics. They will go through a discovery process with content that will build a deep, conceptual understanding of the properties of operations to explain why we perform operations in a certain order when we see just the naked numbers.

This is a highly adaptable outline for how design thinking could be introduced to your learners over a multi-day project. This plan works best if students are divided up into groups of 3-4 for all work except the introduction to each concept at the beginning of class. Learners should stay in the same group for the whole class.

Includes pre-work links, general instructions to guide planning for each day, design thinking student handouts, and multi-grade NGSS standards linked to design thinking.

This experimental one-week course is a freshman-accessible hands-on introduction to Nuclear Science and Engineering at MIT. Students build and test their own Geiger Counter, and so doing, they explore different types and sources of radiation, how to detect them, how to shield them, how to accurately count / measure their activity, and explore cryptographical applications of radiation. This course is meant to be enjoyable and rigorous at the same time.
This course was offered during the Independent Activities Period (IAP), which is a special 4-week term at MIT that runs during January each year.
WARNING NOTICE:
An activity described in this course is potentially hazardous and requires a high level of safety training, special facilities and equipment, and supervision by appropriate individuals. You bear the sole responsibility, liability, and risk for the implementation of such safety procedures and measures. MIT shall have no responsibility, liability, or risk for the content or implementation of any of the material presented. Legal Notice

This course provides students with an opportunity to conceive, design and implement a product, using rapid prototyping methods and computer-aid tools. The first of two phases challenges each student team to meet a set of design requirements and constraints for a structural component. A course of iteration, fabrication, and validation completes this manual design cycle. During the second phase, each team conducts design optimization using structural analysis software, with their phase one prototype as a baseline.
Acknowledgements
This course is made possible thanks to a grant by the alumni sponsored Teaching and Education Enhancement Program (Class of ‘51 Fund for Excellence in Education, Class of ‘55 Fund for Excellence in Teaching, Class of ‘72 Fund for Educational Innovation). The instructors gratefully acknowledge the financial support.
The course was approved by the Undergraduate Committee of the MIT Department of Aeronautics and Astronautics in 2003. The instructors thank Prof. Manuel Martinez-Sanchez and the committee members for their support and suggestions.

This course provides students with an opportunity to conceive, design and implement a product, using rapid prototyping methods and computer-aid tools. The first of two phases challenges each student team to meet a set of design requirements and constraints for a structural component. A course of iteration, fabrication, and validation completes this manual design cycle. During the second phase, each team conducts design optimization using structural analysis software, with their phase one prototype as a baseline.
Acknowledgements
This course is made possible thanks to a grant by the alumni sponsored Teaching and Education Enhancement Program (Class of ‘51 Fund for Excellence in Education, Class of ‘55 Fund for Excellence in Teaching, Class of ‘72 Fund for Educational Innovation). The instructors gratefully acknowledge the financial support. The course was approved by the Undergraduate Committee of the MIT Department of Aeronautics and Astronautics in 2003. The instructors thank Prof. Manuel Martinez-Sanchez and the committee members for their support and suggestions.

In this lesson, students will learn what erosion is and how human actions influence erosion. Includes introduction, demonstration instructions, and questions for wrap-up discussion.

NGSS: 4-ESS2-1

Time: 55 minutes

Materials: plastic containers with sand and gravel, sponges, and plastic cups

Objective:  This hands on activity is designed for middle school students to simulate the competition that occurs between organisms within the same ecosystem. Students will play the role of an organism where they will compete for resources (beads).   Students will collect and analyze data as well as answer conclusion questions.   South Carolina State Science Standards: SC: 7-LS2-1, 7-LS2-2, 7-LS2-4  (Preview Image): "Predator&Prey" by Rathika Ramasamy is licensed under CC BY 2.0  retrieved from https://www.flickr.com/photos/28163014@N00/690266517  

The Girls Who Build Cameras workshop for high school girls is a one-day, hands-on introduction to camera physics and technology (i.e. how Instagram works!) at the MIT Lincoln Laboratory Beaverworks Center. The workshop includes tearing down old dSLR cameras, building a Raspberry Pi camera, and designing Instagram filters and Photoshop tools. Participants also get to listen to keynote speakers from the camera technology industry, including Kris Clark who engineers space cameras for NASA and MIT Lincoln Laboratory, and Uyanga Tsedev who creates imaging probes to help surgeons find tumors at MIT. During lunch, representatives from the Society of Women Engineers and the Women’s Technology Program at MIT will present future opportunities to get involved in engineering in high school and college.

The Girls Who Build Cameras workshop for high school girls is a one-day, hands-on introduction to camera physics and technology (i.e. how Instagram works!) at the MIT Lincoln Laboratory Beaverworks Center. The workshop includes tearing down old dSLR cameras, building a Raspberry Pi camera, and designing Instagram filters and Photoshop tools. Participants also get to listen to keynote speakers from the camera technology industry, including Kris Clark who engineers space cameras for NASA and MIT Lincoln Laboratory, and Uyanga Tsedev who creates imaging probes to help surgeons find tumors at MIT. During lunch, representatives from the Society of Women Engineers and the Women’s Technology Program at MIT will present future opportunities to get involved in engineering in high school and college.

This article highlights science lessons and activities that can help elementary students gain an understanding of the tools and technology involved in polar research. Suggestions for literacy integration are provided, and activities are aligned to national standards.

This article highlights hands-on or multimedia lesson plans about oceans. Science lessons are paired with suggested literacy lesson plans. All lessons are aligned to national standards.

This article highlights hands-on or multimedia lesson plans about glaciers. Science lessons are paired with suggested literacy lesson plans. All lessons are aligned to national standards.

This article provides links to hands-on science activities that could be used in an festival or informal learning event. National standards correlations are provided.

This course provides a hands-on introduction to the resources for designing and fabricating smart systems, including CAD/CAM/CAE; NC machining, 3-D printing, injection molding, laser cutting; PCB layout and fabrication; sensors and actuators; analog instrumentation; embedded digital processing; wired and wireless communications. This course also puts emphasis on learning how to use the tools as well as understand how they work.