Use aluminum foil, salt water, and activated charcoal to construct a simple battery strong enough to power a small motor or light.

Look inside a resistor to see how it works. Increase the battery voltage to make more electrons flow though the resistor. Increase the resistance to block the flow of electrons. Watch the current and resistor temperature change.

Look inside a battery to see how it works. Select the battery voltage and little stick figures move charges from one end of the battery to the other. A voltmeter tells you the resulting battery voltage.

Look inside a battery to see how it works. Select the battery voltage and little stick figures move charges from one end of the battery to the other. A voltmeter tells you the resulting battery voltage.

This new version of the CCK adds capacitors, inductors and AC voltage sources to your toolbox! Now you can graph the current and voltage as a function of time.

Build circuits with capacitors, inductors, resistors and AC or DC voltage sources, and inspect them using lab instruments such as voltmeters and ammeters.

An electronics kit in your computer! Build circuits with resistors, light bulbs, batteries, and switches. Take measurements with the realistic ammeter and voltmeter. View the circuit as a schematic diagram, or switch to a life-like view.

Build circuits with resistors, light bulbs, batteries, and switches and take measurements with laboratory equipment like the realistic ammeter and voltmeter.

Direct Energy Conversion discusses both the physics behind energy conversion processes and a wide variety of energy conversion devices. A direct energy conversion process converts one form of energy to another through a single process. The first half of this book surveys multiple devices that convert to or from electricity including piezoelectric devices, antennas, solar cells, light emitting diodes, lasers, thermoelectric devices, and batteries. In these chapters, physical effects are discussed, terminology used by engineers in the discipline is introduced, and insights into material selection is studied. The second part of this book puts concepts of energy conversion in a more abstract framework. These chapters introduce the idea of calculus of variations and illuminate relationships between energy conversion processes.

Direct Energy Conversion discusses both the physics behind energy conversion processes and a wide variety of energy conversion devices. A direct energy conversion process converts one form of energy to another through
a single process. The first half of this book surveys multiple devices that convert to or from electricity including piezoelectric devices, antennas, solar cells, light emitting diodes, lasers, thermoelectric devices, and batteries.
In these chapters, physical effects are discussed, terminology used by engineers in the discipline is introduced, and insights into material selection is studied. The second part of this book puts concepts of energy conversion
in a more abstract framework. These chapters introduce the idea of calculus of variations and illuminate relationships between energy conversion processes.

This peer-reviewed book is used for a junior level electrical engineering class at Trine University. However, it is intended not just for electrical engineers. Direct energy conversion is a fascinating topic because it does not fit neatly into a single discipline. This book also should be of interest to physicists, chemists, mechanical engineers, and other researchers interestedin an introduction to the energy conversion devices studied by scientists and engineers in other disciplines

Energy storage allows energy to be saved for use at a later time. Energy can be stored in many forms, including chemical (piles of coal or biomass), potential (pumped hydropower), and electrochemical (battery). Energy storage is a valuable tool for balancing the grid and integrating more renewable energy. When energy demand is low and production of renewables is high, the excess energy can be stored for later use. When demand for energy or power is high and supply is low, the stored energy can be discharged. Due to the hourly, seasonal, and locational variability of renewable production, energy storage is critical to facilitating the clean energy transition.

In this activity about chemistry and electricity, learners form a battery by placing their hands onto plates of different metals. Learners detect the current by reading a DC microammeter attached to the metal plates. Learners experiment with different metals to find out what combination produces the most current as well as testing what happens when they press harder on the plates or wet their hands. Learners also investigate what happens when they wire the plates to a voltmeter.

Technologies like solar panels and batteries help us slow down climate change, but they’re not inherently perfect. In this episode of TILclimate (Today I Learned Climate), Suzanne Greene of the MIT Center for Transportation and Logistics and the MIT Environmental Solutions Initiative sits down with host Laur Hesse Fisher to help us navigate how to massively scale up clean tech while making a conscious and dedicated effort to ensure people’s rights, health, and safety.

In this course participants will learn how to turn solar cells into full modules; and how to apply full modules to full photovoltaic systems.

The course will widely cover the design of photovoltaic systems, such as utility scale solar farms or residential scale systems (both on and off the grid). You will learn about the function and operation of various components including inverters, batteries, DC-DC converters and their interaction with both the modules and the grid.

After learning about the components, learners will be able to correctly apply them during main design steps taken when planning a real PV installation with excellent performance and reliability.

Through modelling, you will gain a deeper understanding of PV systems performance for different solar energy applications, and proficiency in estimating the energy yield of a client’s potential system.

This course is part of the Solar Energy Engineering MicroMasters Program designed to cover all physics and engineering aspects of photovoltaics: photovoltaic energy conversion, technologies and systems.

This course aims to give insight in the chain of hydrogen production, storage and use, and the devices involved. Electrical storage in the form of batteries will be discussed. Physical and materials science advances that are required to bring forward hydrogen and batteries as energy carriers will be highlighted.

Stanford University’s Understand Energy Learning Hub provides free access to Stanford course content on energy resources from fossil fuels like oil and coal to renewable resources like the wind, the sun, and efficiency; energy currencies like electricity and hydrogen; and energy services such as transportation and buildings. Explore the Hub and build your energy literacy to address climate change and sustainability issues, engage on equity and human development challenges, participate in energy industry markets and technology innovations, and make informed energy decisions.

This lesson uses a hands-on approach to teach about renewable energy with a case study in wind turbines. This lesson also uses engineering design to help situate renewable energy within a practical human society.