How do you design an aircraft or spacecraft? And in doing so, how do you keep the risk of failure minimal while bearing in mind that they will eventually fail?

In this course you will be taken on a journey through the structural and material design of aircraft. You will see and understand how aircraft and spacecraft are manufactured, and learn how safety is enshrined at every stage.

Experts from the Aerospace Structures and Materials Department of Delft University of Technology will help you explore and analyze the mechanical properties of materials; learning about manufacturing techniques, fatigue, loads and stresses, design considerations and more – all the scientific and engineering principles that structural and materials engineers face on a daily basis. By the end of the course, you will have learned to think like they do!

During this course, we will be exploring basic questions of architecture through several short design exercises. Working with many different media, students will discover the interrelationship of architecture and its related disciplines, such as structures, sustainability, architectural history and the visual arts. Each problem will focus on one of these disciplines and one exploration and presentation technique.

This is a recording of a 45 minute introductory webinar on preprints. With our guest speaker Philip Cohen, we’ll cover what preprints/postprints are, the benefits of preprints, and address some common concerns researcher may have. We’ll show how to determine whether you can post preprints/postprints, and also demonstrate how to use OSF preprints (https://osf.io/preprints/) to share preprints. The OSF is the flagship product of the Center for Open Science, a non-profit technology start-up dedicated to improving the alignment between scientific values and scientific practices. Learn more at cos.io and osf.io, or email contact@cos.io.

In this webinar, Doctors David Mellor (Center for Open Science) and Stavroula Kousta (Nature Human Behavior) discuss the Registered Reports publishing workflow and the benefits it may bring to funders of research. Dr. Mellor details the workflow and what it is intended to do, and Dr. Kousta discusses the lessons learned at Nature Human Behavior from their efforts to implement Registered Reports as a journal.

This video is an introduction to power analyses to improve the reproducibility of your research.

This video will introduce how to calculate confidence intervals around effect sizes using the MBESS package in R. All materials shown in the video, as well as content from our other videos, can be found here: https://osf.io/7gqsi/

Follow along in this video segment from ZOOM as 13-year-old Nick explains how he came up with a design, tested materials, and constructed his own cardboard chair.

Join us for a 30 minute guest webinar by Brandon Butler, Director of Information Policy at the University of Virginia. This webinar will introduce questions to think about when picking a license for your research. You can signal which license you pick using the License Picker on the Open Science Framework (OSF; https://osf.io). The OSF is a free, open source web application built to help researchers manage their workflows. The OSF is part collaboration tool, part version control software, and part data archive. The OSF connects to popular tools researchers already use, like Dropbox, Box, Github, Mendeley, and now is integrated with JASP, to streamline workflows and increase efficiency.

How can you lift a heavy metal table using air? In this video segment adapted from ZOOM, cast members succeed in lifting a table using their own breath and a few plastic bags.

A class on setting up and managing research materials; caring for digital files to enable collaboration, sharing, and re-use; and helpful software/digital tools for organizing personal research files.

Material Science problems for the WeBWorK open online homework system. Includes problems from second- and third-year level (third year topics specifically aimed at mechanical engineering students).

The "tested" problems have been deployed in a class. The "untested" problems have been tested by the creators, but not yet deployed in a class.

These problems need to be uploaded into an instance of WeBWorK to use/assign them.

This video examines the global perspective of materials. It looks that the difference between reserves and resources and considers the question of "running out" of materials.This video part of the Sustainability Learning Suites, made possible in part by a grant from the National Science Foundation. See 'Learn more about this resource' for Learning Objectives and Activities.

This video explains what is meant by a materials life cycle framework. It describes what happens at each step in the life cycle and why designers should consider the life cycle in the design process. This video is part of the Sustainability Learning Suites, made possible in part by a grant from the National Science Foundation. See 'Learn more about this resource' for Learning Objectives and Activities.

This video examines the use of life cycle assessment methods as an aid to the design process. It introduces three methods: full life cycle assessment, streamlined life cycle assessment, and economic input-output life cycle assessment. The advantages and limits of each stated. This video is part of the Sustainability Learning Suites, made possible in part by a grant from the National Science Foundation. See 'Learn more about this resource' for Learning Objectives and Activities.

What can we learn from nature's designs for sustainability? This video compares nature's methods with the industrial era methods of design. It recommends a design strategy based on the connection or relationship between things as a means to achieve transformative innovation for sustainability. This video is part of the Sustainability Learning Suites, made possible in part by a grant from the National Science Foundation. See 'Learn more about this resource' for Learning Objectives and Activities.

Students investigate the materials properties such as acoustical absorptivity, light reflectivity, thermal conductivity, hardness, and water resistance of various materials. They use sound, light and temperature sensors to collect data on various materials. They practice making design decisions about what materials would be best to use for specific purposes and projects, such as designing houses in certain environments to meet client requirements. After testing, they use the provided/tested materials to design and build model houses to meet client specifications.

Expectations by funders for transparent and reproducible methods are on the rise. This session covers expectations for preregistration, data sharing, and open access results of three key funders of education research including the Institute of Education Sciences, the National Science Foundation, and Arnold Ventures. Presenters cover practical resources for meeting these requirements such as the Registry for Efficacy and Effectiveness Studies (REES), the Open Science Framework (OSF), and EdArXiv. Presenters: Jessaca Spybrook, Western Michigan University Bryan Cook, University of Virginia David Mellor, Center for Open Science

Our modern world uses many different materials, often complexly constructed and difficult to recycle. Students investigate the elements in a smartphone and innovations in cement and steel. They also consider the challenge of communicating about large and complex numbers. This guide an extension of the TILclimate episode "TIL about materials."

Student pairs experience the iterative engineering design process as they design, build, test and improve catching devices to prevent a "naked" egg from breaking when dropped from increasing heights. To support their design work, they learn about materials properties, energy types and conservation of energy. Acting as engineering teams, during the activity and competition they are responsible for design and construction planning within project constraints, including making engineering modifications for improvement. They carefully consider material choices to balance potentially competing requirements (such as impact-absorbing and low-cost) in the design of their prototypes. They also experience a real-world transfer of energy as the elevated egg's gravitational potential energy turns into kinetic energy as it falls and further dissipates into other forms upon impact. Pre- and post-activity assessments and a scoring rubric are provided. The activity scales up to district or regional egg drop competition scale. As an alternative to a ladder, detailed instructions are provided for creating a 10-foot-tall egg dropper rig.

Given an assortment of unknown metals to identify, student pairs consider what unique intrinsic (aka intensive) metal properties (such as density, viscosity, boiling or melting point) could be tested. For the provided activity materials (copper, aluminum, zinc, iron or brass), density is the only property that can be measured so groups experimentally determine the density of the "mystery" metal objects. They devise an experimental procedure to measure mass and volume in order to calculate density. They calculate average density of all the pieces (also via the graphing method if computer tools area available). Then students analyze their own data compared to class data and perform error analysis. Through this inquiry-based activity, students design their own experiments, thus experiencing scientific investigation and experimentation first hand. A provided PowerPoint(TM) file and information sheet helps to introduce the five metals, including information on their history, properties and uses.