This resource provides guidance on site selection for the GLOBE Atmosphere data collection protocols. Instructions for building an instrument shelter, a snowboard, an ozone measurement station, and a wind direction instrument are included.

The University of Iowa Center for Global and Regional Environmental Research and College of Education teamed up to develop free eighth grade science curricula on land use and climate science, in response to Iowa’s grade level alignment of the middle school Next Generation Science Standards.

Primary author Dr. Ted Neal, clinical associate professor of science education, led a team of graduate and pre-service teaching students and CGRER scientists to develop the material. They grouped standards, resources and lesson material into six bundles, each designed to engage Iowa’s middle schoolers with local data and information on relevant topics like athletic concussions and agriculture.

These lessons are built on NGSS principles and put learning in the students’ hands with hands-on activities for groups and individuals. Kids will have ample opportunity to get curious, generate questions and lead themselves to answers.

Student teams are challenged to design models of Egyptian funerary barges for the purpose of transporting mummies through the underworld to the afterlife. Planning the boat designs requires an understanding of ancient culture and beliefs so the mummies are transported safely through the perils of the underworld. Students design and build prototypes using materials and tools like the ancient Egyptians had at their disposal. Then they do the same with modern materials and techniques, forming an awareness of the similarities and differences of the barge designs between the ancient materials and tools (technologies) and today's technologies, which are evolved from the earlier ways.

Through multi-trial experiments, students are able to see and measure something that is otherwise invisible to them seeing plants breathe. Student groups are given two small plants of native species and materials to enclose them after watering with colored water. After being enclosed for 5, 10 and 15 minutes, teams collect and measure the condensed water from the plants' "breathing," and then calculate the rates at which the plants breathe. A plant's breath is known as transpiration, which is the flow of water from the ground where it is taken up by roots (plant uptake) and then lost through the leaves. Students plot volume/time data for three different native plant species, determine and compare their transpiration rates to see which had the highest reaction rate and consider how a plant's unique characteristics (leaf surface area, transpiration rate) might figure into engineers' designs for neighborhood stormwater management plans.

Student teams design insulated beverage bottles with the challenge to test them to determine which materials (and material thicknesses) work best at insulating hot water to keep it warm for as long as possible. Students test and compare their designs in still air and under a stream of moving air from a house fan.

Using spaghetti and marshmallows, students experiment with different structures to determine which ones are able to handle the greatest amount of load. Their experiments help them to further understand the effects that compression and tension forces have with respect to the strength of structures. Spaghetti cannot hold much tension or compression; therefore, it breaks very easily. Marshmallows handle compression well, but do not hold up to tension.

Learn how to make a water filter using materials from around your home or classroom.

Students measure the light output and temperature (as a measure of heat output) for three types of light bulbs to identify why some light bulbs are more efficient (more light with less energy) than others.

Student groups are challenged to program robots with light sensors to follow a black line. Learning both the logic and skills behind programming robots for this challenge helps students improve their understanding of how robots "think" and widens their appreciation for the complexity involved in programming LEGO® MINDSTORMS® NXT robots to do what appears to be a simple task. They test their ideas for approaches to solve the problem and ultimately learn a (provided) working programming solution. They think of real-world applications for line-follower robots that use sensor input. A PowerPoint® presentation and pre/post quizzes are provided.

Students are challenged to design and program Arduino-controlled robots that behave like simple versions of the automated guided vehicles engineers design for real-world applications. Using Arduino microcontroller boards, infrared (IR) sensors, servomotors, attachable wheels and plastic containers (for the robot frame), they make "Lunch-Bots." Teams program the robots to meet the project constraints—to follow a line of reflective tape, make turns and stop at a designated spot to deliver a package, such as a sandwich or pizza slice. They read and interpret analog voltages from IR sensors, compare how infrared reflects differently off different materials, and write Arduino programs that use IR sensor inputs to control the servomotors. Through the process, students experience the entire engineering design process. Pre/post-quizzes and coding help documents are provided.

Students use everyday building materials sand, pea gravel, cement and water to create and test pervious pavement. They learn what materials make up a traditional, impervious concrete mix and how pervious pavement mixes differ. Groups are challenged to create their own pervious pavement mixes, experimenting with material ratios to evaluate how infiltration rates change with different mix combinations.

Driving Question: How can we as 7th grade math students use surface area to make a mug that retains heat for the longest amount of time possible?

The Next Generation Science Standards (NGSS)* call for students to use the practices, concepts and content of science and engineering to understand phenomena and solve problems that are relevant to their lives. Starting from a student’s own experiences and community makes the science meaningful and increases engagement while helping students understand how global issues like climate change are present and addressable in their lives. In this series we examine how you can use the new science standards and your community to understand and address real world environmental problems and explore together how to integrate NGSS into your district’s classroom science units.How does engineering relate to solving problems in your community? Learn how IslandWood is using the engineering design process to help students investigate local stormwater problems, seek stakeholder input, and develop solutions. Explore what is involved in putting student ideas into action including possible real-world constraints, practical small-scale solutions potential partners, and mini-grant options. We’ll work together to figure out a plan for the topics and students you teach.

The original Native American story component lesson was developed as part of an Office of Superintendent of Public Instruction (OSPI) and Washington State Leadership and Assistance for Science Education Reform (LASER) project funded through an EPA Region 10 grant. The stories were told by Roger Fernandes of the Lower Elwha Klallam tribe. Mr. Fernandes has been given permission by the tribes to tell these stories.As these lessons and stories were shared prior to the adoption of the Washington State Science Learning Standards in 2013, there was a need to align these stories with the current science standards. This resource provides a current alignment and possible lesson suggestions on how these stories can be incorporated into the classroom. This alignment work has been funded by the NGSS & Climate Science Proviso of the Washington State Legislature as a part of North Central Educational Service District's award.

Using new knowledge acquired in the associated lesson, students program LEGO MINDSTORMS(TM) NXT robots to go through a maze using movement blocks. The maze is created on the classroom floor with cardboard boxes as its walls. Student pairs follow the steps of the engineering design process to brainstorm, design and test programs to success. Through this activity, students understand how to create and test a basic program. A PowerPoint® presentation, pre/post quizzes and worksheet are provided.

Student groups are challenged to design and construct model towers out of newspaper. They are given limited supplies including newspaper, tape and scissors, paralleling the real-world limitations faced by engineers, such as economic restrictions as to how much material can be used in a structure. Students aim to build their towers for height and stability, as well as the strength to withstand a simulated lateral "wind" load.

Students conduct an experiment to determine how varying the composition of a construction material affects its strength. They make several adobe bricks with differing percentages of sand, soil, fibrous material and water. They test the bricks for strength by dropping them onto a concrete surface from progressively greater heights. Students graph the experiment results and use what they learn to design their own special mix that maximizes the bricks' strength. During the course of the experiment, students learn about variables (independent, dependent, control) and the steps of the engineering design process.

This hands-on experiment will provide students with an understanding of the issues that surround environmental cleanup. Students will create their own oil spill, try different methods for cleaning it up, and then discuss the merits of each method in terms of effectiveness (cleanliness) and cost. They will be asked to put themselves in the place of both an environmental engineer and an oil company owner who are responsible for the clean-up.

The Pack is a digital game that encourages learners to use Computational Thinking (CT) to solve problems they encounter in the futuristic world of Algos, where healthy ecosystems have faltered and water and food are scarce. Throughout the game, players must find food sources to attract their own Pack of Algos creatures. These creatures have various functions (like digging, moving, grabbing, and bumping) that can help the player collect seeds and bring water to dry areas. Creatures can be combined to form algorithms that perform complex tasks and overcome challenges. Players’ use of these algorithms is the key to finding all of the seeds and restoring harmony to Algos!

The Pack game and supplemental activities are designed to support middle schoolers in engaging with Computational Thinking concepts and practices while reinforcing basic scientific reasoning. The supplemental activities encourage players to reflect on their gameplay through the lens of Computational Thinking and to explore how solving problems in the game connects to the ways they can solve problems in class and beyond. The supplemental activities can be implemented in a classroom, as part of an after-school program, or even as an activity for families to do together at home.

Students investigate how different riparian ground covers, such as grass or pavement, affect river flooding. They learn about permeable and impermeable materials through the measurement how much water is absorbed by several different household materials in a model river. Students use what they learn to make recommendations for engineers developing permeable pavement. Also, they consider several different limitations for design in the context of a small community.