In this activity, students will calculate the index of refraction of water by measuring the angles of incidence and refraction of light as it passes from air to water. They will follow directions to set up the experiment with cheaply available materials, make several measurements, then answer follow-up questions regarding the mathematical relationship between angles of incidence and refraction, experimental error and uncertainty.

For students that have already been introduced to the water cycle this lesson is intended as a logical follow-up. Students will learn about human impacts on the water cycle that create a pathway for pollutants beginning with urban development and joining the natural water cycle as surface runoff. The extent of surface runoff in an area depends on the permeability of the materials in the ground. Permeability is the degree to which water or other liquids are able to flow through a material. Different substances such as soil, gravel, sand, and asphalt have varying levels of permeability. In this lesson, along with the associated activities, students will learn about permeability and compare the permeability of several different materials for the purpose of engineering landscape drainage systems.

Students will write an informational essay explaining the What, Why and How of water monitoring. They will use information from videos and articles to write an essay. Includes Teacher directions and scoring notes.

Lab: Particle Size Analysis, Soil Texture, and Hydraulic Conductivity

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Pathogenic Microorganisms in Water: Traditionally, groundwater has been used without treatment because the soil acts as a filter, removing pathogenic microorganisms. Some potential sources of pathogens (or disease causing organisms) in groundwater include septic tanks, leaking sewer lines, sewage sludge, intentional groundwater recharge with sewage, irrigation with sewage, direct injection of sewage, domestic solid waste disposal (landfills) and sewage oxidation ponds. The objective of the session is to introduce hydrogeologist to the types of microorganisms, sources of pathogens, and a simple exercise that can be incorporated into a hydrogeology class.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Students investigate how different riparian ground covers, such as grass or pavement, affect river flooding. They learn about permeable and impermeable materials through the measurement how much water is absorbed by several different household materials in a model river. Students use what they learn to make recommendations for engineers developing permeable pavement. Also, they consider several different limitations for design in the context of a small community.

These “Lecture Tutorials” are designed as illustrative review of individual lectures, followed with a series of questions aimed at addressing student misconceptions. 'Think Deeper' sections Foster personal connections to subject matter, and promote discussion. The general idea is that you lecture for 15-20 minutes, the students work through the lecture tutorials for 15-20 minutes, then the class discusses the answers together. These offer a consistent active learning formative assessment, and also act as study guides for students.

From drinking fountains at playgrounds, water systems in homes, and working bathrooms at schools to hydraulic bridges and levee systems, fluid mechanics are an essential part of daily life. Fluid mechanics, the study of how forces are applied to fluids, is outlined in this unit as a sequence of two lessons and three corresponding activities. The first lesson provides a basic introduction to Pascal's law, Archimedes' principle and Bernoulli's principle and presents fundamental definitions, equations and problems to solve with students, as well as engineering applications. The second lesson provides a basic introduction to above-ground storage tanks, their pervasive use in the Houston Ship Channel, and different types of storage tank failure in major storms and hurricanes. The unit concludes with students applying what they have learned to determine the stability of individual above-ground storage tanks given specific storm conditions so they can analyze their stability in changing storm conditions, followed by a project to design their own storage tanks to address the issues of uplift, displacement and buckling in storm conditions.

Students graph existing water quality data using MS Excel, and use the graphs to discuss the changes in discharge, sediment load, and dissolved load along the length of the river and over time. This exercise prepares students to analyze and discuss their own data later in the semester.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Environmental and earth science students seldom have an opportunity to apply what they learn in class to the solution of real-world problems. With NSF support we have developed the prototype Plume Busters software, in which students take on the role of an environmental consultant. Following a pipeline spill, the environmental consultant is hired by the pipeline owner to locate the resulting plume created by the spill and remediate the contaminated aquifer at minimum monetary and time cost. The contamination must be removed from the aquifer before it reaches the river and eventually a downstream public water supply. The software consists of an interactive Java application and accompanying HTML linked pages. The application simulates movement of a plume from a pipeline break through a shallow alluvial aquifer towards the river. The accompanying web pages establish the simulated contamination scenario and provide students with background material on ground-water flow and transport principles. To make the role-play more realistic, the student must consider cost and time when making decisions about siting observation wells and wells for the pump-and-treat remediation system.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Create hydrograph and explore changes in physical parameters on form of hydrograph. Set up is easy: water is sprinkled into a model watershed (sand in pop bottle) and allowed to dribble onto cheap digital scale. Students record weight of water over time, convert to volume, and then create hydrograph. More complicated pop-bottle watersheds can model effect of urbanization, antecedent moisture, changes in precipitation, changes in "soil" porosity/permeability, etc. SEE TEACHING MATERIALS AND TIPS FOR DETAILS!

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

The students are exposed to a brief (approx. 5 minute) introduction/presentation on aquifers and groundwater including their geographical context, structure, and vocabulary.

The students receive everyday materials with different properties: Styrofoam block, scrubbing pad, etc, and a dropper bottle filled with water. They are not initially told what to do, but instead asked what they are going to do. The idea is to use the dropper bottle to put water on the objects and notice if the water passes through or not? They are also encouraged to notice any physical features that may be responsible for these behaviors. Students typically won't talk to each other at first and won't know what to do. Asking them guided questions usually encourages conversation between the students. They can also be asked what other everyday objects could be used for this exercise.

After they have explore everyday objects, they are introduced to a handsample of granite and a sandstone. Although they have not been exposed to rocks in lab, they can usually identify the granite right away, and the sandstone when about the size of the grains. They then will discuss the physical properties of the rocks and hypothesize what is more porous and permeable. They test this with the water dropper.

Finally, as a class, we discuss that something that is porous and permeable like a sandstone makes a good aquifer, and where good aquifers are located.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Three different types of sediments will be taken and the porosity and water flow rate for each type will be determined. From this activity, students will understand concepts of porosity and water flow through soil material.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

In order to give Introductory Geology (Physical Geology) undergraduate non-majors students experience and confidence in using basic algebra to calculate very simple stream flow properties, we use a prework assignment prior to the Rivers and Streams Lab. Prework is a worksheet assigned 2 weeks in advance, which asks students to calculate velocity and discharge as well as unit conversions and calculations of stream load. The questions are put into the context of activities they completed earlier in the semester during visits to the stream (on campus) so questions are relevant to their previous experiences. The prework timeframe gives students the opportunity to seek extra help from their instructor prior to the lab period in which they will make additional measurements, similar calcualations and interpretations of their data.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Students experience the steps of the engineering design process as they design solutions for a real-world problem that could affect their health. After a quick review of the treatment processes that municipal water goes through before it comes from the tap, they learn about the still-present measurable contamination of drinking water due to anthropogenic (human-made) chemicals. Substances such as prescription medication, pesticides and hormones are detected in the drinking water supplies of American and European metropolitan cities. Using chlorine as a proxy for estrogen and other drugs found in water, student groups design and test prototype devices that remove the contamination as efficiently and effectively as possible. They use plastic tubing and assorted materials such as activated carbon, cotton balls, felt and cloth to create filters with the capability to regulate water flow to optimize the cleaning effect. They use water quality test strips to assess their success and redesign for improvement. They conclude by writing comprehensive summary design reports.

Students design and build their own model levees. Acting as engineers for their city, teams create sturdy barriers to prevent water from flooding a city in the event of a hurricane.

Students in groups of two create a 4-minute educational video, brochure, and poster on an aspect of soil erosion, soil conservation, and/or watershed health for agricultural regions within the midwestern states. This is a half term project and the materials are presented in a forum towards the end of the semester. The project is aimed to help students learn to pitch science to a wide audience and provide practice (indirectly) applying scientific principles to conservation efforts.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Students run a pump test and interpret the results as drawdown curves and hydraulic conductivity measurements.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)

Water transport through pipes, pressure losses, (pressure) network design and building, pump selection, pumping stations, power supply, quantitative reliability, operation and maintenance.

In week one of the exercise students determine stream discharge by doing some tedious, but simple hand calculations using data sets provided by the instructor. The following week is designed to be more hands-on. Here, they collect their own field data and create a spreadsheet to perform the calculations more efficiently and accurately. By collecting the data themselves, students gain a more thorough understanding of how stream discharge is both measured and computed; they also learn how the results can be used to determine groundwater baseflow. The fact they do hand calculations prior to creating the spreadsheet helps build their math skills and reduces the "black-box" effect that often develops when using software for data analysis. Students also gain valuable experience creating spreadsheets and learn how this tool can be used to perform repetitive computations more efficiently and with less error. Finally, this exercise asks students to consider the accuracy of their replicate field measurements through a series of questions related to their standard deviation and percent error calculations.

(Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)